![Start Making (Woodworking)](/img/default-banner.jpg)
- Видео 58
- Просмотров 3 289 872
Start Making (Woodworking)
Великобритания
Добавлен 26 май 2022
Beginner Builds, Tool reviews and Honest Advice. Mistakes and all.
Whether you are just starting out, somewhere in the middle or an expert looking to be part of the kind and generous community that has developed around this channel, welcome.
My name is Mark and this is Start Making. All I aim to do is add a little inspiration and encouragement for anyone who is watching.
Whether you are just starting out, somewhere in the middle or an expert looking to be part of the kind and generous community that has developed around this channel, welcome.
My name is Mark and this is Start Making. All I aim to do is add a little inspiration and encouragement for anyone who is watching.
6 DESIGNS but which Mallet is best? || Bluetti AC200MAX TEST
To Check out the Bluetti Range please use the following link.
shareasale.com/r.cfm?b=1801219&u=4168735&m=112337&urllink=&afftrack=
And the promotion code BLUETTISM
As with the links below this is an affiliate link and as such I will receive a small commission to help grow the channel at no extra cost to yourself.
The video where I found inspiration for the mallet design from Black tail studio
ruclips.net/video/fvS9C-gH1c0/видео.html
If you would like to support the channel further:
🔴For a comprehensive list of all my tools - www.start-making.com/tools
🔴For Blogs and more - www.start-making.com
🔴Links to the tools you saw in the video.
LED Batten Lights - UK LINK - amzn.to/3RAjawU
US LINK - amzn.to/...
shareasale.com/r.cfm?b=1801219&u=4168735&m=112337&urllink=&afftrack=
And the promotion code BLUETTISM
As with the links below this is an affiliate link and as such I will receive a small commission to help grow the channel at no extra cost to yourself.
The video where I found inspiration for the mallet design from Black tail studio
ruclips.net/video/fvS9C-gH1c0/видео.html
If you would like to support the channel further:
🔴For a comprehensive list of all my tools - www.start-making.com/tools
🔴For Blogs and more - www.start-making.com
🔴Links to the tools you saw in the video.
LED Batten Lights - UK LINK - amzn.to/3RAjawU
US LINK - amzn.to/...
Просмотров: 4 180
Видео
GUARANTEED You have never seen this trick before
Просмотров 15 тыс.14 дней назад
3 Beginner Builds to show you that you can do more with less tools with as many tips and tricks that I can squeeze in along the way. If you would like to support the channel : 🔴For a comprehensive list of all my tools - www.start-making.com/tools 🔴For Blogs and more - www.start-making.com 🔴Links to the tools you saw in the video. BUILD 1 - DOG BOWL HOLDER Jorgensen 12" f clamps - UK LINK - amzn...
Tools I REGRET not getting sooner.
Просмотров 34 тыс.Месяц назад
Starting out in any hobby is hard work. Woodworking is no different. I spent a lot on tools that seemed right for me at the time. Now, a few years down the line I realise that there are choices. In this video I hope to show you the options and help you to choose. If you would like to support the channel : 🔴For a comprehensive list of all my tools - www.start-making.com/tools 🔴For Blogs and more...
You will be Shocked how much difference this design makes.
Просмотров 62 тыс.Месяц назад
Chisels, Saws, Pliers, squares, rulers, bits, and more. It's all covered in this video. Chisel holders that are so versatile and tick every box and a saw till that maximises space on your wall. This video is for people who want to maximise their French Cleat storage with fun and innovative additions. If you would like to support the channel : 🔴For a comprehensive list of all my tools - www.star...
Time to cut through the years of lies.
Просмотров 88 тыс.Месяц назад
If you are a beginner woodworker it can be impossible to wade through the information given and find out what is useful. So here are all of the things I wish I knew from there start. If you would like to support the channel : 🔴For a comprehensive list of all my tools - www.start-making.com/tools 🔴For Blogs and more - www.start-making.com 🔴Links to the tools you saw in the video. Card Scraper pa...
The DANGEROUS Reason To Choose Your Laser Carefully || xTool P2 Pro Laser Cutter
Просмотров 4,2 тыс.2 месяца назад
Please choose your laser carefully. Thank you for watching. To check out xTool and what products they offer please use the following affiliate link. You will not be charged more and the channel will make a small commission to help with video production in the future. I appreciate your support. www.xtool.com/?ref=MQl4cVgSo0t3m& If you would like to support the channel : 🔴For a comprehensive list...
the CHEAPEST way to Improve your WORKBENCH
Просмотров 18 тыс.2 месяца назад
Every workbench is built differently and we all use our own bench for very specific purposes but this video will inspire you with some ideas for yours. To get an early look at the Bluetti range please click on the link below. shareasale.com/r.cfm?b=1801219&u=4168735&m=112337&urllink=&afftrack= This is an affiliate link and helps to support the channel at no extra cost to you. If you would like ...
ONE Workbench to do it ALL.
Просмотров 114 тыс.3 месяца назад
Make the workbench that suits what you are making right now and what you plan to make in the near future. Every woodworker needs something different but there will be common elements across all workbenches. I hope that this Hybrid Workbench build give you some inspiration. To get an early look at the Bluetti range please click on the link below. shareasale.com/r.cfm?b=1801219&u=4168735&m=112337...
Loads of tips every woodworker needs to know.
Просмотров 43 тыс.3 месяца назад
Every Beginner Woodworker picks up random tips and tricks along their journey. You rarely ever remember where you read or heard them but they can save you a lot of time and money. So here are some of mine. If you would like to support the channel : 🔴For a comprehensive list of all my tools - www.start-making.com/tools 🔴For Blogs and more - www.start-making.com 🔴Links to the tools you saw in the...
First Time Build - Full Cost Breakdown
Просмотров 59 тыс.4 месяца назад
Full cost breakdown to close out the workshop build series. I hope you have enjoyed the journey. I have. I have also included all the potential savings and mistakes I made. 🔴For a comprehensive list of all my tools - www.start-making.com/tools 🔴For Blogs and more - www.start-making.com 🔴Links for the Hero tools of the Build Speed Square 7" - UK LINK - amzn.to/42ic3NT US LINK - amzn.to/3UkcHIK A...
This was a HUGE Challenge || Box Making at its Simplest.
Просмотров 10 тыс.4 месяца назад
4 Boxes, each made with less and less tools. They start at advanced and work their way down to beginner friendly both in build and tools. 🔴For a comprehensive list of all my tools - www.start-making.com/tools 🔴For a few of the tools you have seen in this video. Kreg Cross Cut Station - UK LINK - amzn.to/3Sw0YFH - US LINK - amzn.to/3u2Hxeq Makita Die Grinder - UK LINK - amzn.to/41UtIuO - US LINK...
I Bet 90% of Woodworkers Don't Know This Lid Removal Technique.
Просмотров 34 тыс.5 месяцев назад
If you struggle to get your boxes to come out square this method is as close as I can get to foolproof. For a comprehensive list of all my tools - www.start-making.com/tools If you buy the Makita Die Grinder in the UK and the Kutzall burrs you will need to change out the collet in the Die grinder to take a 1/4 inch shaft. If you would like to support the channel there are all of the product lin...
A Years Worth of MISTAKES Corrected || Beginner Woodworking Tips.
Просмотров 29 тыс.6 месяцев назад
I was definitely wrong about one tool that I recommended. Thinking about it I realised other mistakes that I have made. Not everything we say holds up over time. Here are some of my mistakes from the year. In the video, I also talk about the future of the channel and some of the bigger changes that are coming. For a comprehensive list of all my tools - www.start-making.com/tools The videos feat...
RETHINK French Cleat . It Doesnt Have To Be Like This
Просмотров 141 тыс.6 месяцев назад
Storage can be easy and fun. Not to mention flexible. Why not use your woodworking skills and love of building to enhance the productivity and the overall look of your workshop. For a comprehensive list of the tools I use - www.start-making.com/tools www.start-making.com - For Blogs, tool advice and more. I did use the laser in this one a little and it was gifted to me. To check out xTool and w...
5 Of The BEST Woodworking Channels You're Not Watching | Support
Просмотров 39 тыс.7 месяцев назад
The larger WOODWORKING channels are brilliant but sometimes the RUclips Algorithm can train your viewing to never see the smaller channels and you are missing out. Following the movement started but 2 amazing channels here are my 5 channels that you may not be watching. All the links for the channels mainly featured are below. Busted Knuckle Woodworks - www.youtube.com/@BustedKnuckleWoodworks I...
Garden Room Workshop BUILD Episode 7 || The INTERIOR
Просмотров 41 тыс.7 месяцев назад
Garden Room Workshop BUILD Episode 7 || The INTERIOR
DIY Building a Workshop From Scratch | Complete Build | Fast Version
Просмотров 361 тыс.8 месяцев назад
DIY Building a Workshop From Scratch | Complete Build | Fast Version
UNBIASED Review of Temu Woodworking TOOLS
Просмотров 134 тыс.8 месяцев назад
UNBIASED Review of Temu Woodworking TOOLS
Garden Room Workshop BUILD Episode 6 || Cladding an DONE
Просмотров 16 тыс.9 месяцев назад
Garden Room Workshop BUILD Episode 6 || Cladding an DONE
Or Are These CHEAP Tools A Waste Of Money ?
Просмотров 14 тыс.9 месяцев назад
Or Are These CHEAP Tools A Waste Of Money ?
Laser cut Free STUFF for you and me || xTool P2 Pro Laser Cutter
Просмотров 6 тыс.9 месяцев назад
Laser cut Free STUFF for you and me || xTool P2 Pro Laser Cutter
Garden Room Workshop BUILD Episode 5 || Windows and Doors
Просмотров 18 тыс.10 месяцев назад
Garden Room Workshop BUILD Episode 5 || Windows and Doors
Garden Room Workshop BUILD Episode 4 || The RUBBER Roof
Просмотров 18 тыс.10 месяцев назад
Garden Room Workshop BUILD Episode 4 || The RUBBER Roof
Easy Outdoor Planters any woodworker can make
Просмотров 19 тыс.10 месяцев назад
Easy Outdoor Planters any woodworker can make
Garden Room Workshop BUILD Episode 3 || Walls and RAFTERS
Просмотров 16 тыс.10 месяцев назад
Garden Room Workshop BUILD Episode 3 || Walls and RAFTERS
From BOX to BURNING \\\\ xTool P2 CO2 Laser Cutter review // The novice guide.
Просмотров 10 тыс.11 месяцев назад
From BOX to BURNING \\\\ xTool P2 CO2 Laser Cutter review // The novice guide.
Garden Room Workshop BUILD Episode 2 || Framing the WALLS
Просмотров 20 тыс.11 месяцев назад
Garden Room Workshop BUILD Episode 2 || Framing the WALLS
Garden Room Workshop BUILD Episode 1 || Groundworks and Base Frame
Просмотров 27 тыс.11 месяцев назад
Garden Room Workshop BUILD Episode 1 || Groundworks and Base Frame
Filming for INSTA, FACEBOOK and YOUTUBE made easy and cheap
Просмотров 6 тыс.11 месяцев назад
Filming for INSTA, FACEBOOK and RUclips made easy and cheap
You Won't believe how much I fit into this small SHED.
Просмотров 58 тыс.Год назад
You Won't believe how much I fit into this small SHED.
I like Luke at Aussie Woodshed- poor bugger always works in a down- home, cash strapped way, 17:43 but he comes up with some interesting stuff.Also his focus is on using those less than forgiving Aussie timbers.
French Cleat, I Love it, and the Squares too… A very late entry, but just to let you know that, I watched the video as well as that one where you showed all the cool ideas how made all those behind you… So a big thank you! Remember, *_Life_* is *_Short_* so *_Live Long_* and *_Prosper_* …🖖 Cheers matey!!!
Hello again, hope you are well! Watching the beautiful shots on Jigsaw, I was wondering did you try to cut from the bottom? What I meant is just flick the jigsaw so all you will see the blade from the top and the cut will be less messy. I saw the trick by a woodworking RUclipsr from other side of the pond (Bourbon Moth Woodworking)… (Thank you for the tips about the Formica for my work+feed table, but not sure what types I’ll choose! Commercial Interiors or Home Products? Any Suggestion please??? Thanks…)🙏
Nice build, would have been good to see the space on the inside too though, so we can get an idea how it could work 👍🏽
hi. Thank you. The video after this one is the interior. I hope that helps.
@@startmaking1 oh ok cool I'll take a look, thanks 👍🏽
I have a small pocket hole jig like in the video from Trend and it works great! I can see how the expensive one is much easier to work with though. But if you're a beginner and only making the occasional cabinet the small one is just fine imo :)
Yet another great video, thanks dude. Keep 'em coming and stay lucky
Thank you Paul very much. Much appreciated.
If you can't afford one of these, buy a farriers hoof rasp of decent quality and it eats wood voraciously
Awesome
Thank you very much. Much appreciated.
Nothing that can't be solved with a 100x20x15 mm of plywood (also called scraps). Just put "advertorial" in the title man, you're trying to sell laser cutters. I need nor want a laser cutter.
Enjoyed the whole thing
Thank you very much. Much appreciated.
Long long ago, in a woodshop far far away, I had a Ryobi battery powered generator and that DeWalt saw, and I would use them when I was working on site. I could go for about 4hrs, which was sufficient for what I was doing. This setup is totally doable, especially with the cost of having electricians wire up a shop (no judgement, everyone has to eat)
Really enjoyable video, Mark. I''m afraid it confirms to me what I have always believed. solar power and British weather are not soulmates. Never mind, those were lovely looking mallets. The two-wood contrast worked great and the thumbhole was a clever Addition. Can I ask, do you source your hardwood locally or order online? I find it very difficult to find anywhere locally where I can go and browse hardwoods. My stock has come mostly from bits of old discarded furniture. I see hardwoood bundles online but they always appear to be very thin pieces. Looking forward to the next video. All the best.
Great balanced review of the Bluetti system. I've seen the benefits that Matt (Badger's Workshop) gains with his, but the UK just doesn't seem to cope with solar 😢. Loved the mallets btw. Need to get my hands on some Sapele (or Super League if you try Google assist).
Oh the table saw shot revealed the cabinet with drawers from a year or two ago. That’s where it went. We only see the one side of the shop. No idea what you see when talking to us.
lol, I am glad that I didnt show the side opposite the French cleat wall too much as that is the dumping ground right now. That cabinet is such a god send. So much clutter fits into it. I need a few more to go into the dumping zone next. I would love to actually show what it looks like when talking to camera. It's a bit odd as all the lights are over me and it is fairly dark behind the camera and dazzling in my face.
Yep, and in Australia the f**kwits want to run the country on salar & wind! I've got a 4.8kW system and I agree that the power output does vary due to cloud cover!
I could see keeping the Bluetti in your shop for a day when your power goes out and then letting it charge over the next week or w/e. Otherwise, nice mallets. I wish you focused more on them since that was what this video was supposed to be about.
Sorry bud. if you are interested in a full mallet build the last video before this one has that in it. This one had to be primarily about the battery due to the Bluetti agreement but as the mallets have been so popular I can see a better video for them coming eventually. The battery for me is actually proving to be great as I plan to have it in my workbench so that none of the cables of the tools in the bench are cutting across the floor. But it is an expensive solution for that.
Thanks this is a great video. I do like these videos. I need to make the board that uses the dove tail clamps. It looks quite useful.
Thank you. It has been a great addition. I have seen some impressive ones just made from 18mm ply. They have a panel on the top and one down the side. kind of like an L shape.
Your channel is really taking off now. More than doubled since I subscribed. Well earned. You are a pleasure to watch and listen to.
Thank you very much. I really appreciate it.
Hi mate, well Cool mallets. So sapele and oak…… what other cominations could you use?
Thank you Peter. I like a dark and light combination and where I am these are the easiest to get hold of. I will take a look at other combinations. You could swap the oak for maple, ash or beech. But and this is just my opinion, Oak has the nicest end grain of the lot. Kind of like a tartan. I do like how ash looks on the handles though. But I dont think they would be as nice with 3 wood types. As for the darker wood, sapele is one of the only easy ones to get from my wood supplier. But I would love to try dark walnut or even something exotic instead but it is really pricey.
Something you missed is, how many times do you need to charge on the solar, to save the cost of the panels, compared to the cost of the mains, for the same number of charges (from flat)? That is how long it takes for the panels to pay for themselves. ( At the Least) 😁✌🖖
It's funny, I ended up deleting that bit after it took so long to recharge with the solar panels. I worked out that each battery drain was the equivalent saving of approx £2 so you could pay off the solar panels in approx 280 uses. Then I worked out that if it takes me the equivalent of 12 hours of perfect sun in the UK, well ,you get the rest. Either the solar panels need to be in a better location than mine were, but then you would need exterior grade ones or, again with exterior ones, you need to be constantly trickling into the battery.
Enjoyed the whole thing😉👍🏻🤣🤣
I appreciate that. Thank you
Good video on making mallets Mark. I still have to make mine, but at my age, I'm not in any great hurry. I got a few pieces of what's called ironwood, but I'm not sure what it actually is. A friend who drives truck for a hardwood lumber company gave it to me. That portable power supply appears quite expensive to me. I know you own a lot of cordless tools, but have you ever compared it the cost of running an electric line from your house to your shop? It could be either aerial or buried. Use the electricity in the shop for lights, charging batteries, a space heater for year-round use, & an occasional new tool purchase. Locally, there is a big push on now for solar roof panels to supplement one's electricity needs. I think they look horrid & they have many drawbacks the public isn't aware of. I used French cleats thirty years ago that I forgot about. I had some thermal roll-up shades installed on bedroom windows. I used French cleats to hang plywood valances I made to cover up the rolls & hangers at the top of the windows. See you in the next video.
I think to finish the split box after cutting through, 120g sandpaper sheets stuck to a flat board then turn each side of the box upside down and a few passes it will be perfectly flat and even.
Where do you buy your hard woods from Mark?
I get most of mine from toolsandtimber.co.uk
Good video looks a good bit of kit, i have solar couple 12v batteries only run lights of them at moment and a very long extension lead for everything else😂
Those mallets look cracking Mark 👌🏼
Thank you very much. They were a lot of fun.
Mallets look great and I appreciate the honest look at the battery powered generator.
Thank you bud. And thank you for watching. I appreciate it.
I was looking forward to watching the mallet section, however when the first section was for something costing £1200 it suddenly started to look more like an expensive shopping channel than something for the regular work at home in your shed woodworker. A little too much promotion for me.
Sadly that is the only way to survive on RUclips. In 70 videos this is maybe my 5th sponsored one. The rest I make for a very low fee. If you watch the one before this the mallet build is there in full detail with no promotion, maybe that is better for you. Sorry if this sounds defensive but I find it astonishing that people want me to make videos and not get paid even a little.
Also sadly, not everyone can run the lines to for electricity to their shop so maybe only way. This video isn’t for me or you. That’s fine. Still interesting though as I do a fair bit of camping and other outside endevours. Would I spend that much currently? Nope. But main thing for me is still shop and I already have electric running to it.
Thank you Aaron. I appreciate the feedback. I would never have paid to run electricity to my old rickety shed but this would have served me needs perfectly.
People unless they've tried it recently don't know the reality of being a RUclipsr. It's a lot of work, and it's only become harder meet the costs in time, effort, and money to make accessible, effectiveand constructive content. You are producing videos at a very high standard as well as doing something you love. So, don't worry too much about those who don't understand the need to do sponsorships. And you did this on particularly well BTW, because you are holding yourself to a high standard as you care. Keep going. And hopefully, it won't be too soon before you get to 100k subs. 👍
I need a mallet and I want to know what type of wood you use? Is it a hard wood?
Hey. Not a problem. The outer layers are sapele and the inner and handle is oak. Same build process as the last video before this one where there are more details.
Awesome, thank you so much. I am a woodworker myself and I will be on RUclips and other platforms soon. I'm calling my channel " Wood Shop 76" if you're interested. I love your content and can't wait to see what you do next. Be safe and Happy Building!💯😁
Absolutely. Let me know when you get started.
I looked into getting one of these when I had the power issues at my shop as well, great video and awesome job on the mallets!
Hey Marcus. Wanted to reach out to say how glad I am that you are back making your videos. Glad the chair one went really well. Im not sure this would run your workshop but would probably do for one tool at a time. The mallets were a lot of fun. Thank you
The biggest thing that amazes me is how so many people only look at solar power. There are affordable small wind turbines. I live in the northern rockies, and that is what I use. I can't always rely on the sun, but I can always count on the wind blowing. Another added benefit is I can charge at night.
Wow, what a great use of the natural powers. Thank you.
What a weird thing to say
Always enjoy your videos Mark. Love the thumb print mallet, but don't use it in a crime. The bobbies will have all the evidence they need. LOL.
Lol, brilliant. I will try not to. I really like that one too. Used it a few times this week and after getting used to it, it works a treat.
An “infomercial”!
Thank you John. Much appreciated.
Admit it, Mark, you kind of miss that rickety old shack...not! Love the idea of portable power, but that gear you have would set me back over $1,500.00 USD. That's reasonable, but would put a dent in the kitty for the new cabinet saw. I hate that all of life is setting priorities. Those are lovely mallets. Last month, I made one by hand using cabinet makers files, drawer knife and an oscillating sander from a tree limb. It still needs some finishing, but there was an odd satisfaction of doing it like this. Honestly, I bought a maple mallet, probably twenty-five years ago, because it was on the shelf at the local hardware store and very pretty. It has lasted me and performed well; so I've never had a need for more mallets. And, honestly, everybody makes them. Great video, as always. Enjoyed the whole thing. Big thumbs up.
Hey meat. Not kind of miss, utterly miss. I guess that this video was directly aimed at me 2 years ago. A little niche lol. If I had the choice I think I would forgo the solar panels and just buy the battery and charge off the house electrics each night. For the £1200 odd I think that would have made a huge difference. But then I think that not having the electrics drew me towards hand tools and making a lot of the tools I had. And that is something that has stuck with me now. Not to mention the fact that having the battery would have meant I could get a table saw £800, and lights, £100, and and and. So the budget would have been blown instantly. hmmm, maybe not having the choice was a good thing. Wow, that mallet sounds lovely and from hand tools too. I bet it was really satisfying. I have just got my first draw knife, didnt realise how lethal they were. But so much fun. I dont really know what I am going to do with 7 mallets, plus the 3 I had before. I may need another shed lol. Take care bud.
@@startmaking1 Sounds like you have a mallet for each day of the week, or a giveaway. Once you master the draw knife (think of it as a huge spoke shave), you will enjoy shaping things with it as it hogs out a lot of material quickly. Just remember, as with planing, it works better up hill. It is a tool that will open up a world of opportunity. As you take the family on a hike, you will be scouring the landscape for good wood that can be made into handles, spindles, walking sticks, canes and the like. As you shape the wood (it will tell you what it wants to be), you'll refine it with your shinto rasp file and some good English cabinet maker files. Handmade/homemade Christmas presents will be done. Good weekend!
Hi Mark hope your well, you have made some amazing mallets like the one with the thumb grip a good fit for your hand. You got all that done on a single charge from your power bank that is good going. As always a great video catch you soon Take care
I have a similar setup (Ecoflow) using fixed panels on the shed roof. The key thing is getting the panels to the correct angle to maximise their output, it makes a huge difference in charge times.
Interesting. Thank you Paul. Did you get the fixed panels from Ecoflow or separately. My roof is crying out for panels to be honest but then I worry if I am heading down a rabbit hole.
@@startmaking1 Yes the panels are Ecoflow. I got 4x 100w panels and configured them as a 2x2 series/parallel setup. I waited for a sale to save a few quid.
Oh well done. I have around 350watt total. It's ok but not great. They are not fit for external though sadly. In time, If I still have the battery powering my workbench I will look to install solar on the roof as I plan to run sanders and such from it too. Once I move away from 18v , if I do. Thank you for the info Paul.
www.youtube.com/@john-the-new-guy Very helpful thanks a lot. Making a fool of myself trying to learn woodworking on my own starter RUclips channel. This will help.
You are welcome bud. Love the video. Great song. Cant wait for more.
The thumb hole on that mallet is a brilliant little design - all the mallets came out gorgeous! Liked the trick with the drill for sanding, I used to clamp my Random Orbital Sander upside down to do the same thing!
Mark I have solar so I can charge from that and store power that way even here in Liverpool I seem to always have a decent battery level and have been thinking of adding batteries to my system
That’s interesting, I’m looking at starting a workshop at the back of some land a friend owns currently with no power, had thought about this type of power station and was wondering if solar really charges it enough - I’m probably even worse as in Scotland so saves me finding out the hard way, thanks 👍
Love your work. Keep up the open and honest learning process.
Thank you very much. Much appreciated.
Hey mark.!! I think these are perfect for trades on site , but “ IN THE SHED.? “ £1700 buy’s you a lot of armoured cable and plug sockets and more than enough to pay an electrician to connect it to the mains.!!! And at some point it will need replacing !⚒️😁💪🏻
hi Ian. You are right. All except if someone cant wire, or justify wiring their shed. My shed before I had the workshop was falling down and I guess I was making this video for past me lol. Very niche.
Nice job m8 nice video the mallets look great. Love the blacktail inspired thumb hole one. I think bluetti have missed a trick the solar panels are designed from what i can see to charge off sunlight. Granted America sunny places fine as you noticed uk not so much they need run off daylight. The pannels I've just had installed in my house granted it's not apple's for apple's but they run off sunlight and even with the weather weve had recently im still generating enough most days to power the whole house 😮 i can see the appeal for camping etc though but the cost IMO kills it. 🏴👍
thank you Michael. You are right about the panels too. The battery is good, the panels are more of a luxury.
@@startmaking1 yea they seem be a luxury. Least you've got them though even if they didn't really think it through for British weather 🏴👍
Given the cost of the battery and the panels, the answer to the question "can you power your workshop for free?" is clearly "no, you can't";-)
And you can’t run dust extraction and table saw together?…
My conclusion at the end if you got that far.
@robyarnall you can if they are not as thirsty as mine.
Sadly I just had to send a Jackery and solar panel kit back apart from not working with my Ebike wiring set up (dodgy 2 pin system from China), the overall weight was 19Kilos😂…I’d drain the bike battery just trying to get the kit anywhere worth travelling to. However thanks for that…because it’s great to know for shed projects in the future. Could I buy a baby mallet please? I need one the overall length of your hand? Or a link to a template…I don’t have your kind of kit as I work with miniature things…thanks for this vid…👍🏻✨🌈✨
Yeah, that doesnt sound like a solution for your bike at all. I cant imagine carrying this battery very far at all to be fair. as far as a baby mallet. To be honest I think the small ones are a touch top heavy. The thumb print one is about right but I only have one. I didnt expect to have anyone wanting one. Where are you based, are you in the UK.
@@startmaking1 I’m based in Scotland.
With the solar panels, you'd be better off I think putting them on the roof of the shed. We have panels on the caravan (as well as the house) and whilst on the caravan they are not at the perfect angle, they are constantly able to charge when there is enough light. Saying all that, for the cost of the battery and the panels, I think most people would be able to pay an electrician to have electricity piped through to their shed 🙂 Are you going to put a finish on the mallets?
Trick is to get 32Amps for the workshop.
I have a older panel and already calculated that I would need to upgrade my panel to have the garage wired and tbh I'd prefer a subpanel. That's a lot of money for me. Probably around 5k if not 8 to 10k
@@crystalBall9287fair enough. I'm lucky that I had my panel redone when I moved into my house so it wasn't an additional cost for me. Then when I got electricity put into the garage I made sure I could also run the shed off it
I think you are spot of Chris. Trouble is they are not external ones that I have and unless I run the entire workshop from a far larger battery, buying more panels doesnt seem all that sensible. You are also right on cost. My wiring set me back around £1500. The aim though with the battery is for people who dont think it is possible to do. Ie people with no dedicated space, building outside. Or like I was where the shed I was building in was about to fall down and wiring it was not an option. A very niche video indeed lol.
Why did you need planning permission?
Annoyingly the house is listed.